WHY GROUP TRAINING IS A BETTER CHOICE

The most obvious reason for why people should try and workout with other people is that working out in groups has been shown to keep people motivated. While there is no denying the power that a group can have in motivating people to keep pushing forward, there are other, less obvious reasons why group training is a better option, and below we are going to explore a few of the less talked about reasons why the group is the optimal setting for fitness training.

People that work out together obtain a higher sense of satisfaction from their workout. Recent studies have proven that the biggest impact that physical exercise has on a person isn’t in the body, but rather in the mind. The kind of mental balance which strenuous physical activity provides human beings is extremely important, and might even be vital to a person’s mental health. People are meant to be around people, it doesn’t matter if an individual is an introvert or an extrovert, being a part of a social group is vital for the wellbeing of humans. The experience of working out with a group of peers is an essential part of the social interaction that people need in their lives. People involved in the study of this area have pointed out that the type of social interaction which people obtain from work relations, or from mixing it up in a social environment, while very important, are different than those which a person can gain while engaging in group exercise. People seem to understand this point today, as more people than ever have started clubs or groups to work out as a pack. Local gyms such as, www.matrixfitnessandspa.com have reported a massive increase in the number of people that are signing up as a group in their gyms. People that want to achieve a more meaningful workout should see how it feels to work out in a group; they may never go back to working out alone again.

Denver gyms have started recommending that their members workout in groups because it is safer than working out alone. In a number of studies done on the exercise habits of people in this country, it was found that people who work out in groups are thirty percent less likely to suffer from an injury while exercising. Being around other people helps set boundaries when they exercise, and that keeps people from taking on tasks which might be too much for them. The case study was especially aimed at people that lift weights in gyms, as those who lift weights alone are not only more likely to try and lift too much weight, they are also at a higher risk for being injured when an accident occurs and they find themselves in need of assistance. People that don’t work out in groups should at least be working out with a personal trainer, or other fitness professional in order to reduce their risk of being hurt while at the gym. As with most other cases, in gym there is safety in numbers.

A FEW THINGS MOST PEOPLE DON’T KNOW ABOUT URINALYSIS

One of the most surprising facts about urinalysis for most people is the diversity of different things which UA tests can be used to find. People generally think of UA tests as something which are given in order to detect the use of illicit drugs, and while that is certainly a big part of UA’s purpose, there are many other things which urine tests are used for today. Companies like, www.gulfdiagnostics.com, have started offering advanced urine testing which can indicate if a person has some sort of illness that their doctor is trying to determine. Until recently, blood tests have been the only means for detecting different illnesses in the body, but as urine testing has become more advanced, it has started to replace blood tests in many cases. Urine testing is obviously preferred by the majority of patient’s, and doctors are discovering things which can be seen in the urine which might not be seen in blood tests. Using blood tests to find many different kinds of illnesses is still a vital part of a doctor’s examination tools, but urine testing is moving forward and may one day replace blood testing all together.

Urine drug testing is a requirement of all government employees. Most people don’t know that since the late 70’s, anyone employed by the government has to undergo drug testing when they are hired, and randomly throughout their employment. UA testing became a requirement for government employees after a number of high profile cases came to light which indicated government workers abusing their positions while under the influence of illegal drugs. The lawmakers decided that there had to be measures created to avoid drug use within the government, and therefore passed a law requiring all government employees to have drugs tests. The new drug testing requirement was met with some surprise at the time, but it has proved itself to be an excellent tool in making sure people in the government are held to a higher standard.

Another fact about urine analysis which many people might find interesting is that it has helped save companies billions of dollars over the last ten years. UA testing has only recently been adopted as a standard practice by most companies, but since it was placed into action it has made a major difference for businesses all across the nation. Drug testing has saved companies from losing it all when an employee of theirs was indicated in some accident while under the influence of drugs. All a company needs in order to avoid being held liable during a lawsuit involving their employee is produce records which show that said employee was being tested for drugs while working for their company. In addition, UA testing has kept uncountable numbers of drug users from being hired into a company. People who use illegal drugs are not only less productive than other workers; they are also far more likely to be involved in some incident which could disrupt work for all people within a company. UA tests are essential for companies that want to make sure their staff is clean and clear headed on the job.

A FEW DIFFERENT KINDS OF RADON TESTING

Radon testing has become a hot topic all across the states, as more advanced forms of radon testing have helped discover radon in area of the country in which it was not previously thought to exist. There is no place in which radon inspection has become a bigger issue than in Colorado, where the rapid growth in the population and the massive expansion of new residential areas all around Denver, have spurred the discovery of dozens of new cases in which radon contamination was found. Local radon testing agencies such as, www.abetterhomeinspectioncolorado.com, have been expanding their radon testing programs in order to keep up with inspections of the new areas which are quickly becoming populated for the first time. The spike in awareness about radon has also helped bring about an increase in the number of cases of radon testing in residential areas which have been occupied for a long time already something which is of equal if not greater importance as radon inspection of newly populated lands. In this brief article we will explore the main types of radon testing, as well as why they are so important.

The first, and arguably the most important form of radon testing is radon water testing. Radon gas can contaminate huge areas of soil over time, and the shifting earth can cause that soil to get pushed into rivers and lakes. Containing radon contamination in bodies of water is said to be the hardest type of radon containment for people working in the radon removal field. Testing water sources near areas in which people live is essential because it helps radon inspection agencies to locate contamination points. If a radon inspection shows radon presence in water, the team will find the source of contamination near the water and eliminate it. After the contaminated soil has been removed, the team can focus on setting up filtration systems in the water in order to ensure that people are not drinking water with radon in it, as well as keeping the radon contamination from spreading to other bodies of water in the area. When the problem is caught in time, a huge amount of danger can be avoided from radon water contamination.

Radon gas is the second most serious problem when it comes to radon as a threat to public health. Construction work which breaks up the ground has a huge potential for causing a pocket of radon gas to start streaming up into the air around the pocket. Even when a radon test has been performed in the past, heavy construction and digging can release a dangerous amount of radon. In rural areas which are undergoing construction for the first time, the importance of radon testing simply can’t be stressed enough. Once radon gas has been detected, a radon team can install filtration systems running directly from the source of contamination, stopping the poisonous gas from ever turning into a public threat. People should always keep in mind that radon gas has no taste and no odor, so the only way to make sure that a property doesn’t have radon gas is with a radon inspection.

SOME INTERESTING THINGS ABOUT BRAIN SURGERY MOST PEOPLE DON’T KNOW

Brain surgery is now one of the most popular areas of specialized medicine in the country, but just fifty years ago there weren’t even schools that dedicated their resources to brain operations alone. Doctors have always been exploring how to operate on the brain ever since the birth of modern medicine, but until recently the task was left up to general physicians. The idea that a group of doctors should dedicate their entire career to working with the brain was probably strange because the technology which existed in the past was not advanced enough to allow for many different courses of action when it came to operating on the brain. Today, neurosurgeons are specialized doctors that dedicate their entire life to discovering the mysteries of the human brain and how it can be operated on. Neurosurgeons have been able to advance discoveries made in the last few decades which show potential for curing come of the most problematic and common problems that the human brain may face.

Another interesting fact about brain surgery is that it is not often down without opening the head at all. In major neuro clinics such as, www.bnasurg.com, the science of modern brain surgery has started moving away from opening the head up in order to operate, and begun to use tiny instruments which are inserted through the nose or ear, in order to perform major operations. The main difference today is that there are now electronic maps of the brain which indicate exactly where the problem in the brain is, and allows the doctors to use the tiniest of tool in order to reach the problem areas. The obvious advantage of performing brain surgery without making major openings into the head is the faster recovery time for patients, as well as the lower levels of risk during the surgery. Many neurosurgeons predict that in the near future science will allow doctors to operate on the brain using nothing but lasers, making the operations even less invasive and safer for the patient.

Most people would be surprised to learn the huge number of different conditions that are treated through brain operations. People think of a brain surgery taking place when an individual has tumor, or has suffered some trauma due to an accident, in fact the majority of brain operations are not due to either of these issues. Neurological problems resulting in problems which a person is born with are the number one reason for brain operations today. Patients that are born with speech or hearing problems can often be helped through a brain operation which corrects the damaged area of the brain. Brain operations are increasingly used when people have emotional disorders as well. Many doctors have begun to realize the amazing potential that brain operations may hold for people with a wide variety of different emotional issues. Most recently, a doctor in Japan has been making serious advancements in the battle against common depression through the use of minor surgical operations on the brain. The future of man’s mental health may rely on surgical operations of the brain.

 

 

A FEW TIPS WHEN YOU DECIDE BUY BUSINESS

The Rocky state is currently ranked as the number one place in the country for small business. These surpluses of small companies that appear each year in Colorado make it a dreamland for people that are interested in buying a business right now. Over the past few years there have been a lot of new broker companies that help broker the sale of small companies between parties, as well as setting people up with contacts on both sides of the court; selling and buying. One such agency, www.businessbrookercolorado.com, has created new systems for selling companies in which they collect offers from all of their different business contacts, and then present them to their clients. Afterwards, the broker goes one step further and actually does all of the legal footwork involved in the purchase or sale of a company. Thanks to these types of services, the Colorado business sales market is a very fast paced one, with hundreds of companies being sold each day. The business broker in Colorado has more work on his table than he has had in the history of the business broker industry, with sales only expected to increase over the next few years. In response to all the excitement over the sales boom happening in Colorado, we have put together some tips for people on the other side of the table, those who are interested in buying a business.

Due to the heightened amount of competition, there may be dozens of different companies bidding on a small business at one time, so people that are truly interested in acquiring a small business have to be aggressive. A business should be valued on it potential worth and its current worth together. Being short sighted can lead to people making offers that are far too low, and almost certain to be rejected. If a person or company doesn’t have experience in evaluating the value of a business, they should hire an outside consulting agency that offers exactly those kinds of services. When you try to buy business without a solid understanding of how to arrive at a good offering price, your chances of winning the bid decrease.

If you want to make sure that the business you are thinking of purchasing is really the right fit for you, don’t just rely on fact sheets and number, get in to the office and spend some time with the company you hope to own. While a detailed study of a company and the solid advice which a broker can provide are essential tools in the purchase of a company, there is no replacing first hand experience with the company you might one day own. All of the huge company owners out there today have been able to get to their spot at the top of the business game because they have used every tool possible in order to make the right calls on buying or turning away from a new business, and anyone who wish to follow in their footsteps will have to roll their sleeves up and get involved in the game first hand.

THE KEY DIFFERENCES BETWEEN A REGULAR DENTIST AND AN EMERGENCY DENTIST

When looking at the things which separate the traditional dentists from the dentists that works in the emergency dental field, we have to look at the structure of the emergency dental agency. Emergency dental clinics such as, www.wohrmandentalgroup.com, are unlike regular dental clinics because they don’t have a set client list. Regular dental offices have a certain number of patients that they see on a regular basis. New patients are only taken in if there is an opening because a former patent has stopped coming in. The Wohram Dental Group on the other hand, will accept new patients at any time, and they don’t have a set number of patients they can receive. If a dentist is able to see a patient, the patient will be attended to, no matter if they have seen that dentist previously or not. The flexibility with which emergency dental clinics run their business is the first defining feature between the two different types of clinics.

An emergency dentist has to be good at dealing with situation without planning. A regular dentist has the luxury of being able to take several x-rays and study the patient’s case before deciding on the proper course of action, whereas an emergency dentist has to act quickly. Emergency dental situations often leave no time for long speculations concerning what the best move is to take for each oral health problem. Emergency dentists have to be prepared to ask fast, as soon as there is a problem detected, and to know exactly what the best route is to take instantly. It might be said that emergency dentists are better suited for high pressure work situations than other types of dentists, and they often better suited at making quick decisions.

Dentists that work in emergency clinics work outside of their office more than regular dentists. A traditional dentist’s office is not going to send a dentists and his assistant to a home when there is a dental problem, they will always require the person to come into their office. An emergency dentist not only is sued to working out of the office, many of them actually prefer it. One of the most common reasons why dentists state that they chose the emergency dental field is because they like the fast paced work which requires them to operate in different places. Many dentists find that working in a clinic year after year can become very difficult, and that they end up seeking the more stimulating environment that comes with working outside the office in different locations. Along with the change of scenery that comes with being an emergency dentist, there are also some financial benefits that are eared from working outside the office. Due to the fact that emergency dentists often have to travel to a patient’s home to give treatment, they can charge up to three times as much for the same procedure than they could from their office. The patient’s insurance company still covers the costs, so the situation isn’t usually a problem for anyone involved.

THE HARDEST POINTS OF COMMUNITY ASSOCIATION MANAGEMENT

While community association management has many difficult aspects to deal with, the first one to make our list is trying to get votes passed when a community repair is needed. As anyone in the property management business knows, when there is some sort of community improvement or repair needed, the manager has to get the vote of at least three fourths of the community in order to undertake the work. Even if the repair or improvement that is in question isn’t going to cost the board any money, unless three fourths of the vote is collected, people in the community can file a legal action afterwards. The task of collecting community consent on issues of work that needs to be done in the area are such a pain in the neck that most of the time the property manager pays a HOA management team, such as www.accuinc.com, to take over the task for them. Having a professional property management team collect the three fourths of the votes needed to undertake the community work is usually a better option, because apart from the headache of collecting the signatures of the majority of residents, there are also a number of very specific legal documents which must be filed away along with the petition in order to make sure it is totally above the books.

Dealing with new residents that are just entering the community is always a nightmare for the property management association.  Just when the community managers start to feel like they have finally gotten all of the residents on the same page, in come a new group of people and turns the whole system on its head. The job of a community manager is certainly to listen to the residents and try to make them happy whenever possible, but the changing of people form a community always brings fresh ideas, and new perspectives on the way things should be run, and that means a lot of extra work for the property board. One smart trick that most homeowners association managers have started to employ is to have a rule in which no new rule can be submitted for change in the community regulation unless it is within a certain preset time. In other words, a special rule is set into practice which makes it impossible for new residents to change existing laws as soon as they arrive because there is only one date a year in which new suggestions and votes and be brought forth.  Anyone that thinks this idea might have been sent down from heaven for them will need to do some research on local laws before they can enact it. In some states the rule only permits that three months can go by between votes for policy changes, and other states don’t allow any timeline to be set for when new votes can be requested by homeowners. If you live in a state which doesn’t allow for any regulations to be placed on when new residents can ask for a vote, you had better just hope that you don’t get any new community members soon!

SPINE TREATMENT IS ON THE RISE

Amazingly, there were around five million spine operations performed in this country alone last year, and as the data for operations from many other nations is not readily available, it is hard to estimate how many operations may have taken place worldwide, but the number probably reaches the tens of millions. In this article we look at the reason behind the increase number of spine operations that are going on today, and we also examine the positive aspect of the increased frequency with which spine operations are taking place.

People are no longer willing to just live with pain which people in the past may have felt they had no other choice but to deal with in their lives. Indeed, as we progress as a people, the importance of comfort in life is always on the rise. The idea of the macho man that bears all pain as it comes and does so with a smile is all but a memory of the past. Today’s people want to feel healthy in their body and their mind, and they are willing to address any issue they may have with their physical health. New pain treatment clinics have begun to emerge all across the nation which are dedicated to deal with all sorts of pain issues people have to deal with, and one of the most popular of those being back pain. A local clinic, www.bnasurg.com, treats around ten thousand patients a year, and that is just one clinic among many others. If a person sufferers on a daily basis from serious back pain, then they are much more willing to address the problem than they may have been in the past, and that is one of the major reasons why certain types of treatments, such as spine treatments are on the rise.

The fact that newborn babies that suffer from spinal conditions can now receive treatments is another cause for the rise in the number of spine surgeries which are being performed around the country. In the past it was very hard for back specialist to diagnosis and adress spine issues in babies, which meant that they were likely to grow up and have to undergo lengthy spine treatments later in life. Thanks to leaps made in technology, doctors are able to spot potential spine issues in new born babies and often times intervene before the problem is able to get worse.  The miracle of treating a newborn baby’s medical problem right at the start of their lives is an amazing gift to the world, as doctors are able to prevent a lot of suffering from the child in the future. Interestingly, doctors today are trying to find out how they may be able to take the process a step further and spot back issues that are developing when the baby is still a fetus. If doctors could one day make adjustments in the baby’ s developmental process before birth, the need to perform spinal operations may one day no longer exist.

THE MAJOR TASKS THAT ROOFING CONTRACTORS PERFORM

Roofers are among the most called upon construction service providers in the country today, with around three million roofing jobs being done each year. There is no secret as to why roofers are in such high demand, after all there are nearly two houses for each person in this country, but the specific jobs that roofers undertake may not be as well known by the general public. In this article we will look at the main reasons why people seek the help of a roofing company.

As global climate changes provoke more frequent and violent storms, it is becoming increasingly more common for people to need a roofer to fix damage caused to their roofs by storms. A major roofing company, www.jkroofing.com, reported that during the last year around half of all the roofing jobs that came to them, came after a major storm had hit. Especially in areas of the country where winds that can top 90 miles an hour are common, the need for roofing is widespread. One of the most reported types of damage that takes place during a storm is loss of roof tiles, as well as holes in the roof caused by falling tree branches and other objects picked up by the wind. The problem of roof damage after a storm is even more pressing than during other times because it is usually coupled with the threat of water damage which can enter the home through the damaged structure. Sadly, during the period after major storms there is often a major shortage in roofing shortages available to people, and even more so when the storm takes place in a rural area. There are times when homeowners are left waiting for weeks for a roofing company to arrive to their homes. Roofers recommend that homeowners keep an emergency roofing repair kit om hand in case they need to make a minor repair after a storm as struck.

The second major cause for the high demand on the roofing industry is due to the fact that there are many older homes in the nation which are just starting to need repairs made to their structures after so many years of use. Right now, homes from the late 60’s are beginning to show the strain which time has placed on them, and most people with homes from that area are starting to experience minor, or moderate problems with their roofs. Luckily for homeowners of older properties, the roofs from yesteryear were constructed before the top roofing materials became too expensive to use, and in most cases only need to be repaired, not replaced. Roofers that get called to newer homes with roofing issues are tending to see more and more roofs which need to be taken down completely and rebuilt, since apart from the minor cosmetic issues they may have, the roof’s very structure might be at the brink of collapse. If a roof can no longer be counted on as a safe structure in the home then it must be replaced, as it is one of the principal structures of the home.

THREE QUALITIES OF A GOOD LOCKSMITH SERVICE

Being available when the clients are in need is perhaps the most important of all the qualities which make for a good locksmith. Here in Denver we are lucky enough to have many good locksmith services right in the city. Online sites such as, www.dannyjoelockandkey.com can have a locksmith out to a home or automobile in the greater Denver area in less than two hours. In fact Denver is a great place to get locked out of your home, or to lose your keys in because it has some of the top locksmiths in the country. Locksmith Denver reviews by local users are always above the 90 percent mark, with most people reporting that the locksmith they called had someone out to their site within the hour. Sadly, in larger cities where there is a massive demand on locksmiths, the industry leaders sometimes take advantage of the demand to leave their clients hanging for longer than appropriate amounts of time. In many big cities locksmiths feel that there are always so many people in need of locksmiths so they can give them long wait times and they will have no other alternative than to wait. In reality, no matter what city you live in, there should hardly ever be a situation in which your locksmith asks you to wait for assistance for more than four hours. In the case that you call a locksmith that asks you to wait for assistance for more than a few hours, just tell them that it is too long a wait and that you will seek the services of another company. If enough people start to demand faster services from their local locksmiths, they will eventually get the picture and begin offering quicker response times.

Another thing to look for in a locksmith service is a company that sends its people out to jobs with the best new tools. While it may seem that locksmiths always use pretty much the same tools, in fact the lock industry puts out hundreds of new tools for locksmiths each year. Better tools can mean overall better locksmith services. New tools are designed to cause less damage to locks than previous models, and the work can also be done faster with the advanced new lock opening tools. When it comes to creating new keys to replaced lost ones there are now amazing machines that are about the size of a bible and which can create a new key for a car in less than five minutes. Locksmiths that don’t stay up on new gear may be providing an outdated service to their customers.

Lastly, but certainly very importantly, the locksmith that comes to aid you in your time of need should be friendly and personable. The chances are that if you are locked out of your car or home, you are having a pretty bad day. The least a locksmith can do when he comes to give you a hand is offer a little understanding, and perhaps a little smile to brighten your day.

 

HOW TO FIND PRICE DEALS ON CUSTOM WINDOWS

People that are on the hunt for good offers on custom windows have a lot of options. There are currently nearly twenty thousand window treatment dealers in this country alone, with another fifty thousand dealers from overseas which sell their products through locally based websites such as, www.eastgreenbushwindowcoverings.com and other sites of the nature. The list of where people can search for new window coverings is so long in fact that the search might be impeded by the huge quantity of different possible outlets through which a customer could find their next set of window coverings. In this article we suggest a few ideas for folks looking for low cost window coverings, which we have reviewed out of hundreds of different sources in order to determine which sellers might provide the cheapest deals. It should be mentioned that unless shopper is buying his window coverings through online sources, the price can change drastically from one state to the next. We conducted our own research in the state of Colorado, so while some of the information contained in this article might be pertinent to shoppers from other areas, local sources should also be sought out in order for customers to learn more about their local window treatment options. Just to give an idea of price differences depending on state, the average window treatment was around 20 percent higher in cost in California than it was in Florida in 2015. Prices for window coverings might also change based on how large of aa city the customer lives in, and what the state taxes are like for home improvements items such as window coverings.

To begin with, custom blinds can be found at amazingly low prices if the customer goes directly to the factory. The price of most window treatments bought from local distribution centers is going to be around thirty percent less than those window coverings bought from home improvement stores or local window covering shops. The factory outlets are able to provide the window coverings at cheaper prices because they don’t have to deal with the cost of sales people on their floor, or of the high rent for shops in the commercial zones of the city. People that want to buy from factories should be aware that they will need to provide their own transportation for the window coverings from the factory to their homes, as factory outlets rarely offer delivery services.

Used window coverings have been becoming increasingly popular in our state in recent years. Due to the fact that there are so many people today that are in search of unique window coverings which might not be on the market any longer, a number of used window covering shops have opened. The used window coverings dealers are indeed a great place for people looking for window coverings which not many other people will have, not to mention the secondhand window coverings can often be found at an extremely low price. Sometimes window coverings can be found for half as much when bought through secondhand dealers.

WHY ONLINE SWIMMING LESSONS ARE SO IMPORTANT

Online swimming lessons bring the power of learning to swim to people that wouldn’t otherwise have access to that knowledge.  Every year, a heartbreakingly high number of young people and adults drown in this country, simply because they don’t know how to swim. In fact, amongst children ages 3 to 7, the leading cause of death, after car accidents is by drowning. As they teach us in school from a very early age, a person can drown in just 3 inches of water, so knowing how to swim, and dealing with water in general is a must for anyone. A lot of people don’t live in parts of the country with access to natural bodies of water, or to swimming pools, and for those people, there is very little opportunity to learn how to swim, and even less opportunity to have a coach teach them the step by step of how to get into the water and start swimming. Sites like www.fourstrokescoaching.com, have brought swimming lessons to a wider group of people than has any other training program launched before it. All over the Midwest, public schools have started to implement the online swimming classes into their school programs. Parents are delighted that their children are learning a skill at school which could one day save their lives, and the kids are just happy to be having so much fun. There may never be a better way to get the skills people need for learning to swim to them than through online swimming lessons, and that is one of the things that makes them so vital for so many people. Online swimming lessons are also very important because many people have never learned to swim because they don’t feel comfortable doing so in front of strangers. Those of us who grew up with a private pool might take for granted that people that have never had a pool, could only learn to swim in a public area, and for many people, especially adults, not being able to swim is a serious area of embarrassment. After lack of access to educational programs, the biggest cause for adults not knowing how to swim is that they never take on the task because of the shame they feel. Adult swimming lessons on the web have made it possible for people to learn how to swim from the privacy of their own homes, and that has made all the difference for many people. Lastly, online swimming lessons are very important because they provide a low cost educational tool which many people today would otherwise not be able to afford. Swimming lessons in private clubs can be very pricey, and for people that don’t have a lot of extra cash, it could seem ridiculous to spend money they don’t have on an activity which they don’t often get to do. Online swimming lessons have made it possible for all people, from all walks of life to learn the valuable skill of swimming. Online classes are sometimes even given for free at community centers and other public social institutes.

THREE QUALITIES OF A GREAT SHADES DEALER

  1. People in the window treatment industry should always be willing to talk with customers about their different options. For first time home owners, getting a set of shades, or some other window covering, might be a really big deal, and sometimes that fact can be taken for granted by window treatment dealers that are not in touch with their clients. The first sign of a good window coverings dealer is their ability to explain things to their customers, and take all the time which may be needed in order to make sure their clients end up with the window covering which is right for them. Dealers should be able to help their clients decide on what kind of window treatment is best for their style, price range and any unique needs. Customers take notice when a window coverings dealer is just there to get them to buy a window treatment as fast as possible then get them out the door, and when a dealer is there to help them find a very special window covering. Even online window coverings dealers such as, blindsnshades.org have special customer help support for people that are shopping online. In fact, since much of the window coverings are now sold through the web, the best window coverings dealers have been doing everything possible to make their customers experience better. On some sites, a customer can connect live with a sales representative via video call, as they browse through the web site. The main goal of most online sellers today is to combine the best of both online shopping, with that of coming into a store and getting personal customer service from an actual person.
  2. Shades dealers have to have the lowest prices to be at the top of the industry. Items like blinds are a bit less competitive in the window treatment industry, but when it comes down to an item like shades, which is one of the most heavily produced window treatments around the world today, the ability to offer a low price is what separates the great shades dealers from all the rest. When a shades dealer has been working in the industry for a long time, they get to know the biggest suppliers so they are almost always able to get deals on items which newer companies can’t even imagine, not to mention they tend to buy in high volume, something which also help to lower the final cost by a considerable sum.
  3. Lastly, all excellent shades dealers should have a reliable team of window treatment instillation workers. People do not want to spend their free time installing window covering these days, and that is the main reason why window covering installment is now an almost standard part of any shades purchase. Many companies have set limits for how much a customer needs to spend in order to have their window treatments installed for no additional cost, yet the truly excellent window coverings dealers will tend to include free instillation on their products, not matter how little their customers spend.

THREE NEW FEATURES THAT CAN BE SEEN IN THE MODERN TRADE SHOW EXHIBIT

  1. A new kind of trade show exhibit has begun to appear which uses computer and videos instead of people. Not far behind the rest of the world, the trade shows have also started to update their technology with more and more trade show booths being run by computer systems and video media. Each individual industry has thousands of trade shows each year, which means that if a company wanted to take part in the majority of them, they would have to hire a full time staff just to work trade shows. Modern trade show booth designers such as, igegroup.com, have begun to design trade show booths to function as best as possible without anyone having to be there. Companies make videos which play on loops, something which allows the crowds to get informed about the company, and computer stations are also used which allow people to investigate further into different areas of the company. Using an online, company chat room to answer customer questions in real time has also become a popular choice. Trade show booths which run on automated systems make it possible for companies to participate in far more trade shows than they would otherwise be able to, and there are even some companies today which will take charge of shipping a trade show booth from one show to the next, maximizing the potential number of shows which they can participate in. There are few other means of marketing which are so effective as trade show marketing, and with the new systems that have emerged, companies can take part in as many different trade shows as they wish.
  2. A lot of event booths now use special activities which may have nothing to do with the company, or their products, to draw people in from the crowd. The pressing issue for most companies that are involved in the trade show events is that they don’t have any way to get clients to pay attention to their booth; after all there are usually around three thousand booths in a standard trade show. One way which people have started to combat the issues of getting passed by is by using fun events to draw folks in. In the more easy going trade shows, companies will even use music and dance to get people to come to their booth. Most trade shows are divided up into sections by country, so people have started to take advantage of that fact by creating themes for their booths, based off of the part of the world they are from. A lot of the business people that attend trade shows may spend months going from one trade show to the next, so any chance to show them something new could be a positive point.
  3. Lastly, many trade show booths have started to use intense lights to catch people’s eyes. It may seem bizarre, yet the use of bright neon lights, a trend that began in Japan, but which quickly spread all across the globe, is a very effective way for people to get their booths noticed.

THREE STEPS TO GETTING READY FOR SPINE SURGERY

  1. The first thing that must be taken care of when a person is preparing for a sciatica surgery or spine surgery, is to find the best possible doctor for the specific surgery that will be performed. There are currently tens of thousands of treatment centers that work exclusively in back pain surgeries, and each of them has a group of surgeries that are their expertise. One back pain treatment clinic may be the very best when it comes to repairing a slipped disk, while a different clinic may be the right choice for sciatica procedure. A patient’s regular doctor may have some good insight as to what type of specialist the patient should seek out, and where the best person from that field could be found. Online searches will also yield a high number of possible surgery providers. Some sites have extensive information about the different operations, and even the background’s of each individual doctor. At bnasurg.com, a great many different types of specialist can be found in one place. Once a patent has found the right doctor for their operation, there is not much left to worry about.
  2. Another of the things that must be done when getting prepared for a back pain surgery is to prepare for the recovery time that will follow the operation. The average recovery time for a spinal operation is between three and four months, with two of those months being bed ridden. The recovery time for back operations is much higher than many other types of operations because the back is an area that is so easy to reinjure. When the doctor tells his or her patient that they must reframe from all activities that can put extra stress on the back, they should be taken very seriously. Many people feel such a tremendous relief from pain in the weeks following their surgery that they start to become more active than ever, and in many cases they start to undertake physical activities that cause them to injure their backs again. If a back is injured during a recovery period, the patient will have to wait till the injury is healed, then undergo another operation, a possibly more complicated one. In the months preceding a back pain operation the patient should do any serious house repairs needed, leave everything in the best order possible so that later on they will be able to just take it easy as they recover. No consideration is too large or small when it comes to planning a smooth recovery period. People whose bedrooms are on the second floor may want to consider moving downstairs temporarily when they are getting better following a back operation. If a patient lives alone then they might have to hire a service to take care of some of the daily tasks while they are healing up.
  3. The last step which must be taken before a back operation is to kiss chronic pain goodbye. The patient should start to accept the fact that they will no longer suffer from pain day in and day out, but that they will be able to enjoy life without pain once again!

CORNERSTONE CHRISTIAN SCHOOLS OFFER THREE WAYS TO MAKE SCHOOL MORE FUN FOR KIDS

  1. At cornerstone Christian schools the teachers are encouraged to take their kids out of the classroom as frequently as they can. It has already been proven that kids learn subjects in many different ways. Some students have a very visual way f learning, and for those children reading and seeing a teacher work out a problem in class may be the best way to learn a subject. Other students have a more hands on style of learning, which means they pick up new concepts better when they are able to see them put in action in real life. For the hand on type learners, the more chances they have to get out of the classrooms, the better their quality of education will be. In Cornerstone schools the teachers are asked to plan as many field trips out of the classroom as they can each year. Students are often taken to workplaces, museums and ecological sites where they can see the concepts they learn in class put into action in the real world. Field trips are also a big advantage because they help break up the day to day routine which can cause some students to lose interest in class. A few trips off school grounds each year can go a long way towards keeping young people engaged in their school work. People that want to read more info on Cornerstone’s off campus programs can do so at sa-ccs.org.
  2. Cornerstone schools provide some religious studies for their students, so kids learn all about spiritual life along with other standard topics. Many parents struggle with the challenge of getting their kids into more faith based programs. For a lot of families, the only time the kids get to be around church run facets and learn about religious matters is at Sunday school. Sunday school is a great way to get kids to learn about some of the most important parts of the bible, yet just one day a week is not close to enough time for a young child to properly learn all they should about religious matters. At Christian school San Antonio, the kids receive a little bit of religious study work each day as they attend their normal classes. Student s that graduate from Cornerstone schools know far more about spiritual matters than those that graduate from normal public schools, and that knowledge can be a great help to them for the rest of their lives.
  3. Private schools like Cornerstone have better meal programs for their kids. The food situation at public schools has a lot of serious problems. The state still isn’t sure how they can provide their students with cost friendly and nutritious meals, so at many public schools the students are still subjected to eating less than healthy food items. Kids that eat poorly at school are far more likely to eat poorly out of school as well. Cornerstone schools provide their children with healthy, balanced meals that help their bodies grow, as well as teaching them the importance of good eating.

THREE THINGS THAT MAKE INDUSTRIAL CONSTRUCTION COMPANIES TRULY EXCELLENT

  1. Transparency on prices and expected dates of completion. When you visit an industrial construction website like turner-industries.com, you will find a whole list of different services that the company offers, as well as a number of contacts where you can write or call to get pricing information. Turner Industries also puts a lot of attention on completing their services on the date that was promised; sadly not all construction companies are so straightforward about prices or completion dates. When you sit down in a meeting with an industrial construction company, the staff should be able to give you a fairly accurate estimate about the cost of most jobs. While it is almost impossible to give an exact price in the early stages before a construction job begins, the construction company should be able to tell you the exact cost of individual services, such as pipe bending fabrication, or industrial molding. Companies that tiptoe around price information when you have your first meeting might not be an upfront company later on. The same is true when it comes to the due dates of construction jobs. Again, giving an exact date for when a job will be done can be difficult if not impossible, but giving a timeline that states the very latest time the job should be done is basic in construction dealings. A contract will help keep both parties happy, since in the end the expectations are very clear for each group involved.
  2. Good industrial construction companies are always around when you have a question or concern. The average industrial construction company may have thousands of different clients at any given moment, but that should never be an excuse for poor customer attention. The bigger that a company becomes, the more staff they should hire to deal with all the needs and issues of their customers. Always ask for a number where you can reach your construction contact at anytime, day or night. When it comes to large scale construction jobs a small problem can get really big in a very short time. The need to be able to check with your sub contractor to make sure all things are going as planned is a must. A good industrial contractor should also take the initiative and check in with their clients at least once a week. The person you sign the contract with for the work you are having done is the person who ultimately holds the responsibility for your satisfaction. If at any time you feel like you are not getting the level of service you deserve, make your opinions known to the executive so something can be done.
  3. Another thing that can set one industrial construction company apart from the rest is the equipment they use. A good industrial construction firm will have the latest and greatest equipment available for all their job sites. A typical issue is that some construction companies have a fleet of brand new construction machines, but they are only available for one job at a time, while the company may be undertaking several jobs at once. Always be sure and ask your construction agency what equipment will be used on your job sit.

 

URGENT CARE IMPROVES THE QUALITY OF LIFE IN AN AREA FOR TWO MAIN REASONS

  1. Better access to health care is one of the deciding factors for how a community rates in overall quality of life. Believe it or not, there is a national system that rates each and every city in the United States on a scale from one to ten, for quality of life. The findings that the quality of life reports issues each year may seem like they wouldn’t directly affect a community, but they do in fact affect it in many ways. Communities that rank higher in quality of life rankings, on average receive more new business each year than those with low rankings, by around 50%. The value of a home or apartment can increase dramatically with a high quality of life ranking, and the scores that the community receives can even encourage the city to spend money on things like more museums and parks. One of the biggest deciding factors for the score that a community receives for its quality of living is based on the quality of the medical services available in the area. In order for a community to be considered as an area with excellent quality of life, there must be ample doctor’s offices, public hospital, and urgent care There also must be a good ratio between the number of healthcare providers and the number of residents. If you take a look at the international standards for quality of life, you may notice that they also base their standards very closely with the level of medical care offered, and for that reasons countries like Sweden and Norway, both renowned for their excellent medical care, are at the very top of the list. When you visit the websites of health care providers, such as www.oopsouchohno.com, you can see that there is always a lot of pride taken in the fact that they serve a specific community. For both the residents and the healthcare providers, making a community a better place to live by offering easy healthcare to the public is an issue to brag over.
  2. An urgent care center makes it possible for a more diverse group of people to enjoy the community. If you are young and healthy then you might take it for granted that there are many people all around us that have a more pressing need for quick access to medical attention. There are many folks that look at the medical services offered in the area they would like to live before any other aspect of the community. Elderly people feel more comfortable when there is an urgent care center close to their homes in the case of an emergency, especially as some of them suffer from chronic illnesses which require they frequently visit a hospital. The same is true with people that have extreme allergic reactions to some foods, being close to an urgent care center may be their only chance to receive the quick, lifesaving help that they need if they are exposed to certain elements. The fact that having an urgent care center in the area makes it a place where all people can live more comfortably is certainly one of the biggest reasons that urgent care centers make a community a better place to live.

Production of Long Play (LP) Records

When the stampers are made and given a chromium coating (0.1 inch thick) as a scratch-proof seal, it is sent off to the factory for creating mass-produced records.  10 LP records are being made in a factory which is also called the pressing plant. The pressing plant is a short distance away from the recording studio (where the sound was recorded), the work area of mastering engineers (where the mastic disc is made), and the plating plant (where the stampers are created). Pressing plants have the capability to work and able produce around 185,000 records in a day. The record is made of a plastic or vinyl. This is made by melting down a powdered plastic inside of a heating mixer. Once the plastic has melted, it will be mixed until it achieves a jelly like consistency. After which it is drawn through a roller press that molds the plastic into long, thin sheets. These sheets must have the strict specifications for its thickness, and how brittle it is. The plastic sheets are then set to cool where after they are cut into multiple squares. These are called biscuits. The biscuits have to be then softened a little. This is done by reheating them. Then they go through the press. The one operating the press has to ensure that the biscuits inside are laid out in a proper and arrange manner to avoid any errors, or result in a faulty disc. He will then turn on the press to start the process of stamping. The press will create the needed grooves and sound patterns onto the softened plastic biscuits. This pressing method is applicable to all kinds of records (LP, single, 78s, and 45s) as long as the proper stamper is used.
vinyl albums

Vinyl Grooves

After stamping, the biscuits are still square and brought into another machine which labels them. This machine also cuts the square corners to create a round shape and the edges are then smoothed out. After which a hole is drilled into the center through the pasted labels and finishes the disc. There is another version of this method in which the stampers for both sides, the record labels, and a coil of black vinyl plastic is put on the press which functions automatically. The temperatures are then raised to around 300 degrees Fahrenheit, which will make the plastic melt. This melted plastic forms into the stampers and takes the shape along with the grooves. This alternate press method has similarities to injection molding. The machine also create the hole in the center and then with a flash cutter rounds out the discs and smoothens it. Once it goes to the finishing area, every one of the LP records undergoes an inspection prior to getting packed. Once it has been pressed and inspected, it goes to the packaging area and put into a sleeve or envelope made of paper of cellophane. It is slipped into the designed jacket/cover for the song, and then gets shrink-wrapped. The packaged albums go into boxes and are shipped to stores and distributers around.

Uncategorized |

Choosing the Dimension of Your Window Drapes

Choosing window drapes, as one of the preferred window treatments for most posh residences, is not just choosing the fabric and color.  The dimensions play a key.

You can get your floor to ceiling height and window width from your house architect but if you only bought your house or you’re just renting a space, you need to take out that tape measure.

Mounting

Where should you mount your window drapes?

Before we proceed to how long your window drapes should be, you should decide on how high up and high wide you want them to be mounted.

Custom Blinds

Blinds

Hanging Above the Frame

Granting that your windows are not French and your windows sit low from your ceiling, opt for mounting the four to six inches above your window frame. Without having to be anal about the precise measurement, you can also let it sit halfway between the ceiling molding and your window frame.

Hanging It Wide

Having a wide panel of drapes even when you open your window can make your window look grander.

Do this by extending your rod three to six inches beyond your window frame.

Length

How long should your window drapes be?

The general rule is that your window drapes should be floor-length. Exceptions include: if there is a radiator; or a deep sill.

Window drapes can come ready-made in different lengths ranges from 64 inches to 144 inches. Even if you have your window and floor to ceiling dimensions from your contractor or architect, still measure from your floor up to where you will be hanging the rod. Round up. Your local dry cleaners can shorten and hem them up, if needed. The current look dictates that your window drapes should touch the floor (or radiator or sill, whichever is there).

Having too short window drapes could ruin the look of your entire room.

You can choose among two alternative approaches to your window drapes length.

  1. Just Touching the Floor (or Sill)

With this alternative, the window drapes fabric should hit the floor or hang half an inch above it.

This is a classic look. It also look tailored, making it seem like your drapes were custom made for your window even if you bought them ready-made.

Go for this look if you will be opening and closing your window drapes a lot. It would be easy to open and close them without sweeping your floor in the process. It would be practical to use this approach for kitchens and bathrooms where grime and moisture easily accumulate.

  1. Extending a Bit

The modern stylish look for window drapes is having them extend to the floor by one to three inches. They give off a relaxing vibe as it flows down, compared to keeping it hanging straight down with the classic look. This still looks tailored and can hide floor flaws especially if you have uneven floors.

You can opt to use this approach for formal rooms or rooms where you would like to have the luxurious feel. You could go for the more exaggerated take of this look by going for an extension of six inches or more, having the fabric pool on the floor. It can look romantic.

Those who do not like the hassle of measuring precisely to the inch the length of from your rod to floor can also opt for this look.

This is a high maintenance look, however. You would have to re-fluff your window drapes from time to time or every time you vacuum or when your pet lies on top of them.

Uncategorized |

6 Guiding Tips for an Effective Celebrity Marketing

Famous people especially the celebrities have always been very good salesman.  Showing the public a familiar face is one of the easiest and fastest methods for companies to make brand representations in the minds of the consumers.  When a widely loved actress or a famous athlete endorses a brand or a product, it would immediately be famous and gain credibility.

Here are some guiding tips to be efficient in employing celebrity endorsements:

1. Prepare the layout for celebrity marketing.

Plan for the best and get ready for the worst.  As part of the process in celebrity endorsements, consider the celebrity’s past history in terms of behavior, reputation, personality issues or past criminal history.  Also include asking around other people who have been affiliated previously with them.  Delve into the celebrity’s past life, their personal program and helpful nature.  Look after your agreement with guiding principles, giving the celebrity procurement a suitable termination term or if there’s going to be any money reimbursement involved.

celebrity endorsements

FIMI Group

2. Expand your information.

Performing a thorough research on the probable celebrity is a must.  Celebrity-awareness is the top on the list but do not let it overrule you.  Quantifiable measures like the ones from Q-Scores or E-poll may give a relevant point of reference but they cannot be the only basis for your research.  It is also evenly important to take note of the qualitative factors like the celebrity’s affiliation to the current brand they’re promoting, their current project and their eagerness to endorse the message and involve in the focal elements of the celebrity marketing program.

3. The Influencers vs. Celebrities.

Accept and take into considerations all possible celebrities, including those non-conventional celebrities with the likes of stylists, nutritionists, doctors, chefs, etc.  Since they are referred to as experts in their respective fields, these influencers have an integral authoritative level of trustworthiness and conviction.

4. Every celebrity marketing is different.

No two deals are alike.  It’s important to know what the celebrity trigger point is.  To begin with, celebrities are character-driven and are used to charming or appealing situations on the turf, so they may be keen to lessen their price to win the deal in getting the spot from the celebrity procurement.  Hollywood talent fixate on the press release and the creative stuff, as celebrity endorsements is all about good image which gives a great impact on their next on-camera break.  Chefs and musicians have books and music to sell, so the same strategies that will help them advance their profile will even be a greater deal for the celebrities.

5. Think of tomorrow.

Think of the future not just what is happening in the moment.  Procure talents who you think the media will want to know more when your celebrity endorsement will launch.  It is a very important strategy to have an effective celebrity marketing.

6. Time is wealth.

Time is very precious.  It’s equivalent to money.  Fee interest and consideration in celebrity procurement is frequently based on how much time the program needs to run the celebrity marketing.  Think artistically about how the talent can be integrated in celebrity endorsements in a short period of time, would increase their probability of participating.

 

Uncategorized |

How LEDs Screens Work

Light emitting diodes or rather LEDs for short is a simple device that we owe a lot to. They have revolutionized modern electronics in quite the way. They can have many different functions and you can even find the in almost every device. Among these devices would be transmit info remote controls, light up watches and digital clocks. They even serve the function to inform you when the appliance in turned on. When many diodes are formed up together, they can become as one whole display screen on a TV or on traffic light signs.

So to put it simply, LEDs are really just little light bulbs that you can place in easily into any electrical circuit. However, compared to incandescent bulbs, LEDs don’t contain a filament that would burn out. They don’t even get that hot. Their illumination comes solely from the electron movement that goes through its semiconductor material and can last equally as long as the normal transistor. The LED’s lifespan is far longer than the life of incandescent bulbs by thousands of hours. As of now, LEDs are already being incorporated into LCD HDTVs in order to come up with even thinner televisions.

LED signs

Diodes

So what really is a diode? Well, it is the simplest form of semiconductor device there is today. In addition to that, a semiconductor is a sort of material whose abilities can vary when conducting an electrical current. Usually the semiconductors in use today have a low grade conductor and even have some impurities like other materials being added to it. This process of mixing in the impurities is called doping.

In our LEDs however, the material used in it is aluminum-gallium-arsenide which is entirely pure. All of these atoms easily bond with their companion elements. This means there are no free electrons to conduct any current. In doped semiconductors, the additional atoms will cause a change in balance, either putting in free electrons or making holes where the electrons go through. These alterations in the materials can make the material itself more conductive to electricity.

But how does it produce all this light? Well, light as we know it is a form of energy that atoms can release. It is composed of many small particles that contain momentum and energy but have no mass. We call these particles photons, and they are the most basic unit of light there is.

Photons are emitted due to the movement of electrons. We find that in atoms, the electrons move in orbit around the nucleus. So as the electrons are moving through the diode itself, it is creating photons and released to what we see as light.

Even though every diode emits light, most don’t even do a good job at it. In a plain ordinary diode, the material just sucks up most of the light energy.

LEDs, however, are designed to release a lot of photons away from it. In addition to that, they are kept in a small plastic bulb which can focus the light to one direction.

Uncategorized |

The Right Framework for your Responsive Web Design

These days it would be hard to find a discussion on mobile websites that would not mention something about Responsive Design. The idea of Responsive Design is to ensure that the website’s pages would adjust to whatever size of the device that the person would be using to visit the site. To do this, the web page would adjust its size to fit the screen depending on the device’s capacity instead of having to display another page that would be fitting for the device. Digital marketing would be incomplete if a responsive website is not part of the approach.

Responsive Web Design

Responsive Websites

The elements of the page would have to reorder, resize, shift positions or even hide some content to adjust to the device being used. For the web page to be able to do this, a lot of web developers have started to use Responsive CSS Frameworks in order to lessen the needed effort to be responsive. For those who wish to create their own responsive site for the first time, using a Framework to do so would be very practical. It is just a matter of knowing which kind of Responsive Framework to use for your site’s responsive web design.

The three most popular Responsive CSS Frameworks today are Foundation, Skeleton, and Twitter Bootstrap. These three share many similarities but also have their number of differences. You just need to decide which of the three, depending on their capabilities, would suit your needs and preferences.

One of the similarities is that these three function as a basic grid system, where the pages are made up of rows where each row has an identical number of columns. Both Bootstrap and Foundation have 12 columns in each row compared to Skeleton which has 16 columns.  The page’s elements can fill in these columns to meet its needs.

Skeleton – Compared to Bootstrap and Foundation which has a lot of add-ons and other components to be used with the grid, Skeleton has a much more simple approach. It has a few components which are already installed but it gives much fewer of these compared to Foundation and Bootstrap. The primary function of Skeleton is to offer a tool that would be able to adapt to any style and design and still be able to give a quick-start tool for fast development.

  • Fast deployment
  • The grid is simple
  • Flexible

Bootstrap – It has its own buttons and form elements, but it also has some add-ons of CSS components used in pagination, navigation, progress bars, and more. In addition to this, Bootstrap also has many other components of JavaScript such as alerts, carousels, tabs, and models. Having these will help you in the long run when your goal is to have your site running well without having to put much styling.

  • Additional JavaScript components
  • Intuitive identification
  • Other add-ons

Foundation – Foundation was made with the goal of having it to be mobile friendly. This would mean that when you are designing and building sites with the help of Foundation, the grid itself already takes into account the use of mobile devices such as phones and tablets.

  • Mobile friendly
  • Many capabilities
  • Ordering based on device

Uncategorized |

The Evolution of Hardware Stores

Technology has drastically changed the way people live in the last 20 years than in the last 200 years. More things can be done in a day today than in a day 50 years ago. Life may be lived in a faster pace now and buying habits may have changed, but some things are still done in the tradition of trust in a brand or the store from where one buys it. Hardware stores enjoy that tradition to this day, because
the element of trust is still very much a significant factor when choosing the hardware store to buy from.
In this day of reality TV and home make overs, single-dweller households, small-space challenges and greening the home and the planet movement; hardware stores have to keep up if they are to cater to the evolving demands of a fickle and varied market. Do-it-yourself products have taken the market by storm, where practically everyone can experiment with household tools to make small pieces of
furniture and furnishings.

Shop Tools Online

Hardware Store

For them, a trusty hardware store like Sullivan Hardware & Garden is like a candy shop filled with all the possibilities of creating and recreating their homes into display pieces of creativity. Sullivan Hardware, like most successful hardware stores, is one steeped in tradition where they serve their customers just as enthusiastically as they have over 50 years ago when they opened their first store. They have, in keeping with the times, sell tools that are very much in demand today as well as those preferred by older generations. There is practically something for everyone in every generation at Sullivan’s.

The good thing about having the years to support a good name, is that they become authorities or experts on the hardware tools they sell. One can go inside and get good advice and the best fit that would balance their expectations on quality and their buying capacity. They help bridge the gap between reality and potential for the home ideas of their customers. A clear proof of this is the rising
popularity of home make over shows on TV and it is amazing how a hardware store can sell tools that bring about so many possibilities.

Hardware stores have become the mecca of interior designers, architects, engineers, and just about anyone who wants to redo their homes into something close to those featured in design magazines at the most minimal cost possible. It is no longer just a place to go to when something in the house needs to be fixed, it now is a treasury of ideas and tools that can spell the difference between having a dump to a fashionable crib for a home.

And just as the times call for, Sullivan Hardware is local store with an online presence. They understand the changes in the market not only in terms of products, but also the changes in the buying habits of customers. They did not resist the change brought about by technology, instead they embraced it by making their hardware store available online. It is no wonder that they are not a hard-sell.

Uncategorized |

Choosing a Harley-Davidson in 7 Easy Steps

Deciding to buy a Harley-Davidson is probably not something you would do one a whim. Unless of course you have money to spare but chances you save just enough to buy that boke you have long dreamed about. Here we list 10 steps to follow in order to get the right bike for you.

harley-davidson

Harley

  1. The first step is clearly to know what the body type of the bike is. There are different types of Harley-Davidson motorcycles. An easy way would be to go to a dealer like Sun Harley-Davidson in Denver. They have a website you can visit at http://www.sunharleydavidson.com
  1. Once you have the body type in mind the next step is to choose the color. You can visit your nearest dealership or go the official website. The choice of color can be something that matches with the body type or it can be one that matches your personality. You are after all the one driving it. Ask if the color is available.
  1. Of course seeing a product online and getting to try it out are two different things. This is where the dealerships come in handy. You can visit one to see what it looks like up close. If they consent you can try to ask if it is okay to sit on it. When sitting, try to take note of how far is the rear end of the bike to the floor. The key is that you should be able to bend your knees while riding a Harley-Davidson. Too low may mean that your knees will hit the pavement. Too high, like at chest level, may not be comfortable for you.
  1. Once seated also check if the seats are comfortable. Just remember that the smaller the model the smaller the seat. You would want something that is very pleasing to sit. You wouldn’t want a sore bum after a long ride right?
  1. Since we’re already on the topic of sitting on the Harley-Davidson, check if you are able to life the bike easily from the kick stand. If you have trouble lifting on the model you want then maybe you should go for a smaller one. You also don’t want something that you can lift very easily as it may cause problems later.
  1. Finally once you have chosen the right model for you, it is time to talk about Harley-Davidson accessories. Do you want it to have an extra seat? Would you like a windshield or even a saddlebag?

Of course it is a given that you need to ask for the price. If it seems high then maybe forego accessories for now and have it installed later.

So what are you waiting for? Go to your nearest dealership and inquire about Harleys. If you’re in the Denver, CO, area, go and visit Sun Harley-Davidson as they are one of the best there is.

Riding Harley-Davidson motorcycles aren’t just about showing people that you can but it is also a statement of who you are and what you have accomplished.

Uncategorized |

Choosing Engagement Rings: Antique vs. Modern

You’ve decided it’s time to up your relationship and buy a diamond ring for you girlfriend. The thing with engagement rings is that you can’t just go to the nearest store and pick the first thing that suits your fancy. Well, that is still possible but wouldn’t doing that make it less special. You would want the ring not just to fit and look good on your soon–to–be fiancée, but you probably would also want it to fit the mood. Anyone can buy a ring from the jewelry store but to buy something memorable is a different thing altogether.

Though are many categories you can choose to get the right one among the many engagement rings in the market, the first decision would have to be if you will buy one that has more of an antique look or the modern one.

Let’s start with antiques. We people hear the word antique it is often associated with something old. That does not mean however that it is not stunning. Many have found that antiques can do the trick. There have been engagements that used rings that were handed down from generation to generation. However if you do not have any good engagement rings from your grandmother then the next best thing would be to buy from a good jeweller. One great advantage of buying an antique ting is that the diamond used will be of higher quality. This is not to say that modern rings do not have the same quality. Generally an antique ring is somewhere in the area of 50 years or more.

However if you cannot afford to buy authentic antique rings, a good alternative would be one that has a vintage feel to it. It can look a bit like an antique ring but without the expense.

Now let’s go to the modern rings. Unlike the antique rings, they may have a simpler design but the design has that modern flare. With modern engagement rings, you can be more flexible since you can also use different stones. Many people today have gone with rubies or even sapphires. You want a diamond? You can also choose different colors. The only problem with modern rings is that after a few years it may not become that stylish. However after 20 to 30 years though your modern ring will eventually becoming an antique one.

The good news for you is that regardless of what style you decide to go with, many if not most, are available in many stores. One good store is Ari Diamonds located in Layton, UT. They have many selections for either vintage or modern rings. You can drop by their showroom or visit their website at http://www.aridiamonds.com

Getting engaged takes some planning. There are many ways to go about it but it all ends with the girl getting the ring. This means that you need to take time to not just carefully plan how to give it but also what kind it is you want to give. To get the best when it comes to engagement rings, go check out Ari Diamonds.

 

Uncategorized |

Finding a Good Company that Does Sewing Machine Repair

Only a woman will fully understand that feeling of satisfaction when one gets a good deal. It applies to anything from clothes, shoes, to make up, and practically everything that can be bought. I love a good bargain, but what I love even more is a good buy.

I have always wanted to have my own business, one that involves designing and making purses for women. I needed to start my project and needed a sewing machine, but I did not have a lot of money to cover everything that the startup I have thought up needed. My mom offered her old sewing machine, but it was not really in the condition that I needed it to be but I did not have enough to buy a new one either.

vacuum cleaner repair

Vacuum cleaner

The solution? Rays Vacuum. They sell, not only vacuum cleaners, they also sell sewing machines new and slightly used ones, and repair them as well. Rays Vacuum has been in business in Denver for 40 years; they are a trusted name in business. We decided to get a used sewing machine from them, since they cover it with a 90-day warranty. I was able to choose from a range of brands, such as Singer, Brother, Kenmore. Elna, Necchi, among others. The slightly used units were in good condition, which was not surprising since they are reputed to be good in sewing machine repair work. Needless to say, I was quite happy with the purchase. It suited my needs and my pocket.

I started with small pouches and sold it online. My small, initial success, spurred me to expand and graduate to toes, carryalls, and even small bags for children. I have since then bought a brand-new sewing machine, still from Rays Vacuum, to incorporate additional features that enabled me to make embroidered decorative patterns on the bags. I was also able to train young women to learn to sew, crochet, and embroider handmade bags. I send them some work when the demand grew in volume. They also make some on their own and sell them in fairs and bazaars.

In a way, they are competitors, but we do have a special code and that is to respect each other’s rights in terms of design for the bags. Social entrepreneurship is still a hit-and-miss exercise, but some have been successful in their ventures. The prospect of profit-sharing is a very attractive incentive to employees, and a motivation to do their best at work, because they have a share in the gains.

My business has grown in small, steady steps in the last two years. I research, I innovate, and I check trends in design and color, customers’ buying partners, and prices. On days when I feel the going is slow, I take a step back and think of how I started with just an idea, some designs, and a used sewing machine that I could barely afford to buy. I look at how my business now, grateful of its progress. It’s not a monumental success, but it is doing well, and it is moving forward. If I could pat myself in appreciation of a job well done, I would. For now, let me go back to my workshop and make my dreams come true.

 

Uncategorized |

How to Measure Windows for Your Custom Blinds

Many stores carry custom window coverings. You can choose from a wide selection ranging from custom shades to custom blinds. While stores do have different selections for you to choose from it is always better to go to the store prepared. This will make transactions go faster.

This means that you have to decide if you will be mounting the covering inside or outside. The advantage of an inside mount is that it is easy to install and attach the custom blinds. An outside mount on the other can create the illusion that the window is longer and wider than it appears to be. An outside mount can also enable you to cover any cracks or damages that are near the window.

Custom Blinds

Custom Window Coverings

Before you start to measure, be sure to remember these simple tips. Always use a steel measuring tape in order to be more accurate and be sure to round down all measurements to the nearest 1/8 of an inch. Finally regardless if they appear the same, measure all the windows.

We start with the assumption that you want an inside mount. When you are ready to measure be sure to get the dimensions for the width and height. Let’s start with the width. This means you measure the window from the left to the right. However you get measurements from 3 areas: bottom, middle, and top. For the final measurement you will use the smallest value of the three. For the height you will measure from top to bottom in three areas: left, middle and right. Similar to the measurement for the width you use the smallest value.

If you are planning an outside mount for your custom blinds, it is a bit tricky. To measure the width you do the same with that of the inside mount but with two differences. First the measurement must be wide enough so as to cover the whole window. Second is that you add an overlap of 2 inches on each side. It is basically the same for the height but you add an additional 3 inches as overlap.

Another difference between an inside and outside mount is that for the inside mount the manufacturers will be the ones to make the necessary deduction to your measurements whereas it cannot be done for outside mount.

This is all assuming that you want everything to be perfect and that there will be no problems when it comes to the installation. The good news is that many stores do not only offer installation but some offer free consultations. At Blind Solutions of Colorado for example, all you need to do is go to their website at http://www.blindsolutionsofcolorado.com.

From the website you can schedule a free consultation to help you with your design or you can send any question that may be bothering you. If you have done prior measurements then discussing your design ideas will be simpler and faster. They can also give you more options for you to choose. Remember for the best custom window coverings in Colorado, go to Blind Solutions of Colorado.

Uncategorized |

A Background on the Indoor Radon Abatement Act

The radon mitigation standards as set forth by the U.S. Environmental Protection Agency are not something that they just made on their own. Many of the standards were based primarily on the Indoor Radon Abatement which was signed by President Ronal Reagan in October of 1988. Under the law, the long-term objective was to ensure that indoor areas would be free of radon contamination. This would not be limited to indoor areas but the ambient air outside the area was included. Under the original law, $45 million was to be allotted on a three-year period to make sure that any radon-related activities were funded both at the federal and state level. Below is a list of some of the provisions of this radon abatement bill.

Radon Remediation

Radon Mitigation

CITIZEN’S GUIDE: The law requires the EPA to constantly update the Citizen’s Guide to Radon.

FEDERAL BUILDING STUDY: Under this law, all federal agencies and departments were required to determine if their buildings faced the risk of being contaminated by radon.

MODEL CONSTRUCTION STANDARDS: The EPA is to develop different standards and techniques to help with the mitigation. This would also include standards for construction.

PROFICIENCY PROGRAMS: An amount of $1.5 million were to be given to companies in order for them to offer radon mitigation related services like testing and mitigation. Once the funding is over the programs would be refunded through a user-fee scheme.

REGIONAL TRAINING CENTERS: For a period of three years, from 1989 to 1991, $1 million annually would be granted by the EPA to different universities who would allow for the establishment of training centers.

STATE GRANTS: Under the law, $10 million per year, for three years, was to be allocated to the EPA and used as grant to help the different states conduct radon reduction programs. This includes different activities like conducting surveys, disseminating information to the public and conducting various demonstrations on the feasibility of mitigation systems.

STUDY OF SCHOOLS: $1 million was allocated to conduct a study on radon specifically on different schools in the country. If levels were found to be high, an additional half a million was given to help with the remediation efforts.

TECHNICAL ASSISTANCE: In addition to helping states with their programs, the EPA was also given a budget of $3 million a year for three years to give the needed technical assistance to said states. Based on the law some of the activities include conducting trainings and seminars and conducting different radon surveys as well.

The list above is just a quick summary of the law but it gives a better and clearer idea of what the government is doing to ensure the safety and health of its citizens. The real question right now however is that it has been more than two decades since that law was enacted. How has the country fared when it comes to radon mitigation? Has the law done what it was actually meant to do? So what do we do? Do we repeal Radon Abatement Act and replace it or do we strengthen it more?

Uncategorized |

Property Types that Private Money Lenders Prefer

Recently bridge loans have started to gain popularity especially in the real estate industry. These loans help borrowers get the necessary capital infusion before the financing they applied for with banks pushes through. Since there are inherent risks to these types of loans private money lenders like Montegra Capital Resources Ltd., prefer to give out what are known as first-position loans. What this simply means is that should the borrower ever default on the loan, they get first priority on the payment.

 bridge lender

car loan

As with any lender, Montegra Capital has different options for a borrower depending on the property. One reason is that different types of real estate can have different LTVs. When it comes to property types, Montegra Capital has different categories.

The first is known as income producing properties. This is a type of property that is either developed or bought and is expected to earn income either by lease, rent or appreciation in the price. Unlike other private money lenders out there, Montegra Capital offers up to 65% LTV for any property under this category. Say for example office properties. Montegra Capital can offer an investor said LTV. Even if the company has a first-position, it is still difficult to collect if the borrower defaults. Thus as an added condition the borrower must be able to show that it has the capacity not just to manage to property but also be able to cover for any expenditure that may arise with regards to the property, particularly in the final phase of construction.

Though Montegra Capital offers a rather high LTV, is still wants the borrower to cover 25% of the cost. However if an investor wants to buy property priced lower that the market value, then Montegra will offer to increase the LTV in order to cover a maximum of 85% of the price. Tell me, do any of the private money lenders you know give such offer?

Another category is known as investment-purpose residential property. This is typically for real estate that is expected to be utilized for business purposes and is often non-owner occupied. One good example is known a flipping or “fix and flip.” What happens is that an investor will purchase a particular real estate, fix it to increase its market value, and then sell it to earn a profit. In this case, the company will offer a hard money loan. Montegra will also want assurance that the owner will never occupy the property even if only a small part of it.

There are still many types of property that Montegra Capital is willing to finance. Suffice to say that it is indeed one of a kind when it comes to lending. To know more about what other types of properties Montegra Capital is willing to finance and what the different terms, visit their website at www.montegra.com. It’s not every day that you get to do business with a lender that looks after you. Then again, Montegra Capital in not just one of the many private money lenders, it is truly ahead of the pack.

Uncategorized |

Marketing Success with LED Display

Since the beginning of the trade industry, advertising has played a major role in the success and growth of businesses. It helps the business sell their goods and services, promote their brand, enhance their company’s reputation, and reach a wider range of audience. That is why, companies are always willing to go full throttle when it comes to their advertising and marketing efforts.

LED curtain

LED panel

Having the advantage of being noticed first by your targeted audience is of utmost importance in the world of marketing and advertising. Companies, big and small alike, are putting up their own billboards and graphic advertising anywhere they can in order to attract the majority of the targeted market. However, the cost of graphic advertising does not come very cheap. Businesses need to allocate an ample amount of money and resources in order to sustain this type of advertising.

Fortunately, the application of LED technology to everyday things brings a considerable amount of relief in the world of advertising. The experts at Nashville-based PixelFlexLED Company explained that the use of LED display in the marketing industry cuts a lot of spending from the company’s budget allocation. Here are some of the reasons why LED is the commodity of choice in advertising.

Flexibility is the key. The potential of what LED can do is unfathomable. It can be used in a variety of ways in the marketing efforts of businesses. LED is very flexible that it can be used as an advertising tool indoors and outdoors. It can also be assembled into different sizes to fit the needs of companies. A company that prefers to have their ads indoors may use small and medium-sized LED signage or LED display. On the other hand, those who prefer to go large can use LED wall in order to promote their brands outdoors.

Ads can’t go wrong with LED. A common problem that a marketing team of a company may face is an error in the production of graphic advertisement. A mistake even as small as a single letter will surely do a lot of damage since you will have to print everything again. Fortunately, one of the significant advantages in the use of LED screen is the ability to edit the entire content of a graphic advertising in an instant. Even the design and the images in an LED panel can be changed easily in order to fit your needs. Lastly, you will now have the ability to have updated ad content that is appropriate when season changes.

LED is efficient and durable. LED is known as one of the most energy efficient technology that exists today. It is estimated that it operates between 80%-90%, which is 3x more than the traditional light bulbs can achieve. This energy savings equates to savings in the operational expense of these types of ads. LED components are made of cheap but sturdy materials. This means that it doesn’t cost that much when replacing one or more broken LED lights. However, that should pose as a problem for LED is designed to work continuously for an equivalent of 11 years. This is equivalent to almost 100 000 hours of continuous usage. This just shows how durable LED lights are.

Uncategorized |

The 5 Great Advantages of Blinds

There are many different window treatments available for you to choose from. You can use curtains, shutters or drapes. Of the many different types available in the market, one good choice would be to go for blinds. Here are 5 reasons why you should do so:

shutters

shades

1. Light control – Out of the many different types of window covering, blinds are the best when it comes to light control. You can choose to have all the light enter the room or even just a part of it. When putting it up you can fit the slats tightly if you want no light to enter the room. Take your bedroom for instance. If you want to sleep longer and not be woken up by the sunlight then just close them tightly. Otherwise if you want to feel that early morning light then you can open them fully or even halfway.

2. Privacy – Unlike the other options, blinds are able to give you the level of privacy that you want. You want people for example to see you having a party in the living room but not in the bedroom while you sleep? That is not only possible but easy as well. You can even enjoy some amount of privacy and at the same time allow light to enter the room.

3. Aesthetic Options – As with other window treatments, it also comes in different colors, patterns and styles. Thus it enables you to create the perfect appearance in relation to the room you are putting it in. You can even choose from different sizes to match the size of the window. If you want it to be safe for your children as well as your pets there are cordless versions available.

4. Material Variety – Aside from the colors and patterns, there are also different types of materials that you can choose for your blinds. This means you can vary the type you want depending not just on the style but also on how much you can afford. Say your dining room has mostly wooden furniture then you can match your blinds and get wooden ones. If the wooden types are way over your budget then try faux wood. The price is a bit lower but it still serves the purpose. That’s how versatile it is.

5. Maintenance – Unlike other window treatments, blinds are the easiest when it comes to maintenance. At the very least, when it accumulates dust, you can simply use a feather duster or a vacuum. Compare this to curtains for instance where you have to change it regularly and you also need to be careful in cleaning it as curtains also have the tendency to fade in terms of color.

So there you have it, the 5 reasons why you should this type of window covering. To know more, go and visit Fine Shadings & Decor. If you don’t have time, just log-in to the net and go see their website at www.fineshadings.com. If you’re looking for blinds, you won’t be disappointed.

Uncategorized |

Better Business with Health Club Software Systems

A healthclub software system is a computer program that is created to aid in the management of a business establishment specifically a gym or a health club.  Its purpose main purpose is to increase the profitability of the business, reduce the cost, increase customer satisfaction, and save time on manual processes.   It can partially or fully replace a certain role in the management of the gym enhancing the efficiency to a higher degree.

Health Club Systems

Fitness

There is a lot of gym management software available in the market right now, however, only a selected few has emerged to be the cream of the crop.  ASF Payment Solutions is one of the best providers of management system that is specific to the health and fitness industry.   Their health club software is always guaranteed to bring about a positive change to the businesses that uses it.  This is the main reason why a lot of health club establishments have been on the race to get the best health club system which is available in the market.

The increase in revenue has been one of the main reasons why health club businesses are using gym management software.  By expanding the ways of collecting initiation fees and monthly fees, an increase in monthly revenues can surely be achieved.  The accessibility of the software through the online portal also increases the visibility of the brand and aids the consumers in registering for a membership. In addition, marketing campaigns through the online platform ensures that the majority of the targeted consumers are reached without using a lot of money and resources.

The reduction of overall operating cost is also one of the driving forces on the application of health club management software.  Health club members usually number from a hundred to thousands.  By going paperless on the data being stored by the business, a considerable amount of money is saved.  In addition, the reduction of overheads also reduces monthly expenditures. Automated security access protocols are one of the major features of management software.  The software allows entry of gym members with the use of membership cards or number codes to ensure that only members are allowed entry within the business premises.

An increase of the overall customer satisfaction is the third main reason why businesses are using health club software.  By getting accurate information about customer behavior, the managers will be able to properly analyze and create a campaign to effectively retain customers and maintain the high quality of service that is being delivered.  In addition, the growing popularity of the social media has led to a more interactive atmosphere between the management and the consumers.  If customer problems are addressed quickly, overall rating also increases.

Lastly, health management system allows the industry to save a lot of time consumed when doing manual labor. Through the use of automation, the managers will be able to focus more on the customers and other essentials and less on the administration.  This way, existing connection to gym members will be reinforced leading to improve customer retention.

Uncategorized |

10 Tips to Take Note When Buying Used Cars

Investing into things may it be a house, gadgets or used cars takes time to decide whether you will be pushing on buying it. Things to consider and tips to ponder on from people you know about the investment you are about to make. Especially on buying investment that requires you to put in a quite amount of money for it.

alignment

used cars

 

Here are some ten tips before buying used cars.

  1. Choice of car model that you like

Choosing a car can be time consuming. One time you will like this and the next thing you will like a different one. Try to see yourself on what you will be driving so it can be easier to choose which car you buy. It will always start once you have chosen a car not unless you’ve reach this stage, it would be a waste to go on the rest of the things to do on buying a car if you keep changing mind.

  1. Prioritize your safety at all times

Unlike brand new car which has all the latest safety features, a used car may be really outdated when it can to its security. In choosing a car, always have your safety a priority at all times. You can’t buy out your safety or your life per say because you want to save a couple of bucks on buying a car.

  1. Background check

Once you have chosen a car model, always have the time to research the owner of the car just to make sure you are dealing with a legit person and a legit car. Go for a background check if the car has pending fees to be paid or legal things that come with it.

  1. Check engine number

Verify the engine number if it matches with that of the car document. Always make sure to check and verify the registration document and make sure it has not been change or tampered by any means.

  1. Check for collision or accident damage

The car may look good but you will never know if it has gone through any accident, minor or a big one. Always check the sides of the cars or keep probing the owner about the car condition.

  1. Check the odometer

The mileage matters if you a buy a used car. If the mileage is too low, it may be altered. If the mileage is too high on the other hand, always give it a second thought. Match the mileage on the condition of the car. Worn pedal breaks can be an indication that the car has been used that much.

  1. Go for a test drive

Once you have done your preliminary research and inspection for the car, always go for a test drive so you can feel how well is the condition of the car yourself.

  1. Put things into writing

If you feel like it would be a good deal that you will be having for the car,ask the owner to put things into writing. The downside of not having one, the owner or you can always claim that a certain important conversation didn’t happen or you might be missing a deal that the owner gave to you and may have alter it instead. Better put out everything into writing.

  1. Always check the documents

Check car documents carefully. Check for tampered documents or if anything on it has been altered. Verify documents in the car registry to make sure everything is legit.

10 . Check the contract before signing

Once you have everything in writing, review the contract before signing it and always have a witness on signing the contract.

 

Uncategorized |

Consult Water Damage Phoenix Contractors for Flooded AZ Commercial Properties

Commercial water damage contractors affirm that a flooded property can be devastating to its owners. Whether caused by extreme weather conditions or some leakage in the plumbing system, water damage entails costs and other challenges to property owners. Among other things, water can soak the carpets and damage the flooring. They can also penetrate the walls and cause furniture to swell, break, sag, or rust. Prolonged moisture can also cause mold development, rotting, more sever conditions especially if they remain unattended.

water damage Phoenix

ceiling rot

Contractors approach commercial damage as fast as they can because another important consideration is the continuation of business operations. Each day that the business is closed because clean-up and repair procedures are ongoing can be equated to losses or lack of income. No business owner wants to suffer losses from water damage and addressing such problems immediately and in the fastest possible time is deemed ideal. Most commercial water damage contractors will work around the schedule of the business to minimize downtime.

Owners who respond immediately to emergencies can submit claims for coverage to their insurance providers. Most insurance companies look into how timely the jobs are done. If you own property that is insured, a quick check of your policy will reveal that it your responsibility as the owner of the property to take immediate action in case of an emergency.

According to water damage contractors, the key to reducing losses related to water damage is fast response. When water evaporates and is absorbed by the air, it is distributed within the surrounding area. This excess moisture on the walls and ceilings result to secondary damage, which damages increase the cost of clean-up and repair significantly. Development of mold is a common example of secondary damage. Not only does the growth of mold create further problems on property but it also has adverse effects on one’s health. Prolonged exposure and inhalation of mold spores can cause respiratory problems, including coughing, runny nose, asthma, bronchitis, and other serious conditions.

When dealing with commercial water damage, there are certain things that should be done immediately. Primarily, make sure that the source of the overflow is turned off. If you are still able to switch off the main electrical power source, do so. However, if it is clearly unsafe to unplug the power outlets or switch off the electronic appliances as they are within or near the affected areas, it is best to steer clear of the flooded areas and call an expert for help.

Paper products should be removed or transferred to dry areas right away. Wipe or mop as much excess water as you can. Remove everything on the floor, from the carpet pads to the wet rugs. Wet furniture should be removed from the affected areas and the cushions should be propped up to allow even drying. If furniture can be wiped down to get rid of excess moisture, then do so. If the drawers and doors of your cabinets have been affected, open these in order to facilitate more air circulation and decrease drying time.

To help you decide on your commercial water damage restoration needs, it is best to consult a water damage contractor who can provide free evaluations and estimates.

 

Uncategorized |